Unsolved
This post is more than 5 years old
1 Rookie
•
4 Posts
0
1055
May 2nd, 2017 07:00
Microsoft SMB Multichannel support on Unity
Can anyone tell me if Microsoft's SMB Multichannel protocol is supported on the Unity platform?
Going through E-lab Navigator, I don't even see reference to it.
Any help or guidance that anyone could provide would be greatly appreciated...
Michael Saldaris
Precision Computer Services
No Events found!
Rainer_EMC
4 Operator
•
8.6K Posts
0
May 3rd, 2017 08:00
yes it is supported - same as on VNX
saldarismg68
1 Rookie
•
4 Posts
0
May 3rd, 2017 08:00
Thank you for the reply...Are there "any" instruction sets....Either Partner or Customer facing, that provide for it's implementation?
Rainer_EMC
4 Operator
•
8.6K Posts
0
May 3rd, 2017 16:00
not really since there is nothing to enable or configure for it on the Unity side
Once you have at least two interfaces configured for a SMB server and the client it gets negotiated automatically if the client is able to do it
Similar to SMB2 CA
You can check via Powershell or use netstat to verify
Futured
1 Message
0
January 17th, 2024 09:36
https://www.delltechnologies.com/asset/en-us/products/storage/industry-market/h15572-dell_emc_unity-nas_capabilities.pdf