Multiple RP clusters to 1 Unity splitter

Question

Hello, When I zone an RPA on a Unity splitter that already has another RPA (different cluster) attached to it, the Unity sees it as ONE host.The initiators of the new RPA are automatically added to the existing Recoverpoint host on the Unity.This is not what I want, the new RPA is a separate RP cluster and has nothing to do with the RP cluster, and all added LUNS, already on the Unity.How can this be solved? Is there a way to add the RPA manually before it is automatically added? Thanks!

10GB7200 · Accepted Answer

I have received an answer.Registering multiple RP clusters as separate hosts instead of all RP clusters as one and the same, unfortunately is not possible.By design, all RPA’s are registered under ONE Recoverpoint host. No true multitenancy for separate RP clusters.So pay attention > All clusters can see and use each other's LUNS.

DELL-Sam L · Answer

Hello 10GB7200, Here are a couple of kb that maybe of assistance. https://dell.to/3non4dE https://dell.to/3Dtfy75

10GB7200 · Answer

Hello Sam

Thank you for your answer. These kb's are unfortunately not about the described problem and do not solve it.

Is it not possible to temporarily disable auto registration of hosts so that I can register the RPA manually?

Thanks!

DELL-Sam L · Answer

Hello 10GB7200, What is your current version of recovery point?

10GB7200 · Answer

Hello Sam, All RPA's running v5.1.SP4.P1

DELL-Sam L · Answer

Hello 10GB7200, Have you tried to do the steps list in this kb under Unisphere for RecoverPoint? https://dell.to/3HKXffX

Unity

Was this post helpful?