TLSv1.2 unity issue

Once TLSv1.2 enabled not able to use uemcli from the outside of storage itself:

uemcli -d xxx -u Local/admin -p xxx /sys/security show
Storage system address: xxx
Storage system port: 443
HTTPS connection

Operation failed. Error code: 0x1000100
Unable to validate the specified certificate. (Error Code:0x1000100)

 

From storage itself it is checking cert:

08:45:57 service@unity spa:~/user# uemcli -d  xxx -u Local/admin -p xxx /sys/security set -tlsMode TLSv1.1
Storage system address: xxx
Storage system port: 443
HTTPS connection

Remote certificate:
Issuer: CN=unity
Subject: CN=unity
Valid from: 2021:08:31:07:10:16
Valid to: 2024:08:30:07:10:16
Serial: xxx
Id: xxx
Would you like to:
[1] Accept the certificate for this session
[2] Reject the certificate
[3] Accept and store
Please input your selection (The default selection is [1]): 1
Please refer to the Security Configuration Guide for backward compatibility.
This change may impact running operations (e.g. replication) and the management services will be automatically restarted for the change to take effect.
Do you want to continue?
yes / no: yes
Remote certificate:
Issuer: CN=unity
Subject: CN=unity
Valid from: 2021:08:31:07:10:16
Valid to: 2024:08:30:07:10:16
Serial: xxx
Id: xxx
Would you like to:
[1] Accept the certificate for this session
[2] Reject the certificate
[3] Accept and store
Please input your selection (The default selection is [1]): 1
Operation completed successfully.

After enabling TLSv1.1 connection from the outside is fine ok:

uemcli -d xxx -u Local/admin -p xxx /sys/security show
Storage system address: xxx
Storage system port: 443
HTTPS connection

1: FIPS 140 mode = disabled
TLS mode = TLSv1.1 and above
Restricted shell mode = enabled