parsing error uemcli attach snapshot

Question

Hello,

The following command is failing

C:\Users\lucksch>uemcli -d 10.100.130.124 /prot/snap -name sv_74_sanp attach -roHosts Host_2
Storage system address: 10.100.130.124
Storage system port: 443
HTTPS connection

Operation failed. Error code: 0x1000017
Command line parsing failed near "-roHosts" token.
There is a syntax error in the command. Please recheck the command syntax. (Error Code:0x1000017)

Someone any idea why.

I have tried all possible options, but no success.

Snapshot creation succeeded

C:\Users\lucksch>uemcli -d 10.100.130.124 /prot/snap show
Storage system address: 10.100.130.124
Storage system port: 443
HTTPS connection

1:    ID             = 38654705745
      Name           = sv_74_sanp
      State          = Ready
      Attached       =
      Resource       = sv_74
      Resource Type = LUN
      Source         = sv_74
      Source Type    = LUN
      Members        = sv_74
      Attach details =

Hostname is correct

2: ID = Host_2

Name = hydac-nt-ftp3

Description =

Tenant =

Type = host

Address =

Netmask =

OS type = Windows Server

Ignored address =

Health state = OK (5)

Health details = "The component is operating normally. No action is required."

Thanks for your help

Axel

Rainer_EMC · Answer

try adding -type before the -roHosts like the example in the command reference guide

Rainer_EMC · Answer

did it work?

lucksch · Answer

resolved first I had to assign the host permission for snapshot to the lun. then attach worked. Thanks for your suppport Regards Axel

Rainer_EMC · Answer

thanks for the feedback

Nits.singh13 · Answer

Do you mean we need to assign the same Host access to LUN for which LUN's snapshot we are going to attach with Host snapshot. Then run the uemcli command and once it is attached we can remove the Host access for LUN. Because if we attach the Host access for LUN and snapshot then there is no use of it.

cikkumollol · Answer

Can you give additional information on how this is achieved?

Herbert Wong · Answer

Hi May I know how to assign the host permission for snapshot to the lun ? Thanks

DELL-Sam L · Answer

Hello Herbert Wong, Here is a link to EMC Unity Snapshots and Thin Clones which explains how snapshots work and how you will manage them. https://dell.to/3JwEsog

Unity

parsing error uemcli attach snapshot

Was this post helpful?