Need help to check Port Flags set at the initiator level

Hi All,

I am facing a powerpath issue with one of the host.Power path showing only one path to GK devices.I checked the SCSI settings for the FA port

C:\Program Files (x86)\EMC\SYMCLI\bin>symcfg -sid 427 -dir 10f -v list

SCSI Flags

   {

     Negotiate_Reset(N)           : Disabled

     Soft_Reset(S)                : Disabled

     Environ_Set(E)               : Disabled

     HP3000_Mode(B)               : Disabled

     Common_Serial_Number(C)      : Enabled

     Disable_Q_Reset_on_UA(D)     : Disabled

     Sunapee(SCL)                 : Disabled

     Siemens(S)                   : Disabled

     Sequent(SEQ)                 : Disabled

     Avoid_Reset_Broadcast(ARB)   : Disabled

     Server_On_AS400(A4S)         : Disabled

     SCSI_3(SC3)                  : Enabled

     SPC2_Protocol_Version(SPC2)  : Enabled

     SCSI_Support1(OS2007)        : Enabled

   }

I want toverify the same from initiator group as well.I am checking primus emc255040 and here is the output of

C:\Program Files (x86)\EMC\SYMCLI\bin>symaccess -sid 427 -type init show USATLKIFSEC12_IG -detail

Symmetrix ID          : 000192600427

Initiator Group Name  : USATLKIFSEC12_IG
Last updated at       : 04:39:25 PM on Wed Sep 28,2011

Port Flag Overrides   : No
Consistent Lun        : No

   Originator Port wwn  : 10000000c96ee41a
   User-generated Name  : USATLKIFSEC12/HBA1
   FCID Lockdown        : No
   Heterogeneous Host   : No
   Port Flag Overrides  : No
   CHAP Enabled         : N/A
   Type                 : Fibre

   Originator Port wwn  : 10000000c96ee611
   User-generated Name  : USATLKIFSEC12/HBA0
   FCID Lockdown        : No
   Heterogeneous Host   : No
   Port Flag Overrides  : No
   CHAP Enabled         : N/A
   Type                 : Fibre

Can someone tell me how to check the port flags are set here and how to check it ?