Performance Analysis VMAX3

You can see: https://community.emc.com/docs/DOC-41948

Performance related articles: Article 196872: VMAX3: Unable to collect performance data from VMAX3 following HYPERMAX OS code upgrade. Article 195749: VMAX3: How to collect STP information. Article 189833: Symmetrix VMAX3: How to collect performance data from the Guest OS Article 190496: SymmPiT fails on VMAX3 Service Processor with write fault error Article 198482: VMAX3 %busy director numbers are incorrect Article 195826: VMAX3: Unable to pull Unisphere Performance Data from vApp Manager. Article 197751: VMAX3: Drives in the same RAID groups showing different utilization and I/O profiles. Article 199893: How to collect performance data off a VMAX3 Article 202174: VMAX3: B2B Credit Counter not showing Article 201025: VMAX3: Open System host receiving Scsi Status 0x28 (Queue Full) Article 203741: VMAX 3: Slower than expected SRDF throughput with a small amount of devices and long distances Article 204185: VMAX 3: High RA CPU utilization reported after a link bounce occurs when there is low IO and running SRDF/S Article 205425: 2A3C during SnapVX session Article 205511: No FAST movement on VMAX3. Ingress and Egress counts not changing. Article 206504: VMAX3 Family: Unisphere device response times are high under low io loads Article 209341: Process for Systems Engineer (SE) to request VMAX3 and VMAX Series STP Data. Article 210414: VMAX 3 core allocation may change when upgrading to 5977.691.684