Unsolved
This post is more than 5 years old
86 Posts
0
5073
Unable to Login To Setup VNX 5500
I need to be able to restart the management server on our VNX 5500, but I'm not able to login to the setup. I've enver logged into it before and have tried all of the default username/password combinations I can think of. Is there a specific one for VNX that I should be using? Thanks
Kumar_A
727 Posts
0
July 14th, 2011 10:00
You would have set it up when you were running the VNX Installation Assistant. The default ones are sysadmin/sysadmin.
Rainer_EMC
8.6K Posts
0
July 14th, 2011 11:00
If you mean ssh into the control station then it's nasadmin
clayman88
86 Posts
0
July 14th, 2011 11:00
I'm not trying to SSH. This is to access the Setup page. http:// IP Address>\Setup
Kumar_A
727 Posts
0
July 14th, 2011 12:00
You will have to use the same credentials that you would use for logging into Unisphere. Username: sysadmin, Password: sysadmin (default).
clayman88
86 Posts
0
July 14th, 2011 13:00
Yeah...doesn't work.
kelleg
4.5K Posts
0
July 15th, 2011 11:00
Check your usernames - you can only login to the /setup page using a Global Admin account. Try logging in directly to SP using the block username.
glen