VNX For File - Usage of 4 x Disks

Dears,

We are configuring a VNX5300 for file.

if you configure the pool through the "Disk Provisioning Wizard for File" we can choose the number of disks to be used, which include the first 4 disks as well, this was we can benefit from the space available on all disks.

However, if we are doing the configuration manually from Unisphere, we cannot find the first 4 disks 0-3 in the available disks to be configured.

I know the OE is installed on part of them, but we should be able to use the rest for other stuff. Any idea how to do it through Unisphere and allocate the space of the first 4, for a CIFS file system.

Regards,