Unsolved
This post is more than 5 years old
4 Posts
0
954
August 6th, 2015 06:00
delete a storagevolume when the array-lun is already delete ?
hi all,
we had a workshop on customersite and we made a test-lun (distributed) in the vplex (metro) for demo-usage.
when the workshop finished we want too delete this test-lun. from top we delete the distributed volume and at the end the storagevolume on each array was present in the cluster 1 + 2 then I detach the lun on vnx-site and made a rediscover on vplex of the array but the storagevolume is not disappearing. I think I had too delete the stoaragvolume before, but now i must fix the problem.
Where can tell me in which way i can delete the storgevolume in vplex, when there is no appropriate lun present anymore.
No Events found!
ankur.patel
2 Intern
•
286 Posts
0
August 6th, 2015 06:00
Can you confirm the version of code you are using for me please?
Ankur Patel
847.722.4333
Advisory Systems Engineer
api1
4 Posts
0
August 6th, 2015 06:00
v 5.4
ankur.patel
2 Intern
•
286 Posts
0
August 6th, 2015 06:00
What version of code are you on? In newer releases if you rediscover the array it will ask if you want to forget unreachable luns. Selecting this should clear this up
It seems like the version you are on does not have it, therefore you will have to go through the CLI and use the “forget” flag which is described in the CLI guide
Ankur Patel
847.722.4333
Advisory Systems Engineer
api1
4 Posts
0
August 6th, 2015 06:00
we have the actual version of software in place (new installlation)and have set the flag to forget the luns, this is my problem
api1
4 Posts
0
August 6th, 2015 07:00
sorry no ! with this version in place i have still this issue
ankur.patel
2 Intern
•
286 Posts
0
August 6th, 2015 07:00
ok thanks, glad to see your problem is solved
ankur.patel
2 Intern
•
286 Posts
0
August 6th, 2015 09:00
just confirming, when you clicked rediscover array did you check this box "Forget unreachable LUNs"?
snalluri
1 Rookie
•
28 Posts
0
August 11th, 2015 13:00
After deleting the volume from the Storage group, you also have to remove the volume on the VPLEX . Ankur mentioned one way of removing the volume and the other way is , select the array--->show logical units---> forget Unreachable LUNs