Unsolved
This post is more than 5 years old
2 Posts
0
1523
VxRail - 10Gb + 1GbE
Hi Folks,
I'm using VxRail P470F Full-Flash using onboard network NIC (2x10Gb SFP+ + 2x1GbE).
I'm using the two 10Gb SFP+ onboard ports for the entire traffic (mgmt + data). I would need to know if I can use the 2x1GbE and configure a vSwitch on it for VM data traffic ?
According to the documentation, nothing states that the 2x1GbE should not be used, and technically, nothing prevent me to use these interfaces from vCenter (they are marked as "down" as nothing is connected right now).
Thanks in advance for your answers !
emc_troy
142 Posts
1
November 27th, 2017 12:00
Yes, you can use the additional 1GbE for VM traffic.
Keith7
8 Posts
1
November 28th, 2017 17:00
Not a problem using 1GbE ports. My VxRail 10Gb are configured for vMotion, vSAN, etc. traffic. 1GbE ports are VMs and north / south networking
BenoitBernard-D
2 Posts
0
November 29th, 2017 03:00
Thanks a lot for your information, I will implement this way !
Regards,
Ben