Unsolved
This post is more than 5 years old
3 Posts
0
1768
C10LE Loopback when upgrade firmware
Hi guys,
Recently we have upgrade C10LE wyse terminals from 8.0.508 to 8.3.14. Can any tell me how to stop looping and what is procedure to upgrade firmware from 8.0.508 to 8.3.14
RMontalvo
560 Posts
0
May 30th, 2017 09:00
Rvedacha,
Review the following knowledge base article: http://bit.ly/2s9YONH
rvedacha
3 Posts
0
May 30th, 2017 20:00
I have two question.
1. How to stop this looping now. We did multiple reboot but did not stop.
2. How to install Japanese version firmware. All latest firmware show English only. Remaining the firmware extension to .jp will help.
hardware_software
3 Posts
0
December 12th, 2018 02:00
<ADMIN NOTE: Broken link has been removed from this post by Dell>.
Dell Wyse - How to Upgrade the Firmware on ThinOs Clients by FTP/HTTP/HTTPS Server and OS_Web File
Upgrading Dell Wyse ThinOS clients on firmware version 8 and below can be done by using an FTP/HTTP/HTTPS server, setting the "autoload" option the WNOS.INI file and placing the necessary FW- file in the WNOS directory
Please note this also applies to ThinOS Lite (for Citrix, also known as Xenith) where 1.x Xenith = 7.x ThinOS versions, and 2.x Xenith = 8.x ThinOS versions.
Complete instructions are provided in the attached document below (English only)
CAUTION:
Upgrading Dell Wyse ThinOS thin clients is only recommended if the firmware version on your thin client is the same major version or the "PREVIOUS" major version. E.G. 6.x/7.x/8.x
Here is a list of recommended update steps:
6.4 to 6.5, etc.
6.5 to 7.0
7.0 to 7.1_033
7.1_033 to 7.1_130
8.0_037 to 8.0_512
(from 8.0_512 you can upgrade to 8.1/8.2/8.3/8.4 )