Unsolved
This post is more than 5 years old
2 Posts
0
74204
Thin clients crash
Hello,
We have T10 Dell Wyse thin clients connecting by RDP to Windows Server 2008 Virtual Machines.
At random moments in time we experienced the bellow crash on some of them.
The .ini setting we are using are the following:
WNOS settings:
signon=0
AutoLoad=1
maxvncd=5
vncpassword=ThinCli3nt encrypt=no
vncprompt=0 accept=5
TimeZone='GMT + 02:00' ManualOverride=yes daylight=yes start=030506 end=100506
TimeServer=172.16.1.41,172.16.1.42 TimeFormat="24-hour format" DateFormat=dd/mm/yyyy
EnableLocal=yes
include=$ip.ini
$ip.ini settings of one of the thin clients(all of them have similar configuration)
connect=rdp \
description="Default RPD" \
host=URLeng001X120.manufacturing.urlati \
icon=default
domainname=manufacturing \
Fullscreen=yes \
Reconnect=yes \
Autoconnect=yes \
privilege=high lockdown=yes
Exit=all
Is this related to some configuration settings or is it firmware related?
How can we make sure this will not happen again?
Thank you,
Coman Alexandru
RMontalvo
560 Posts
0
December 14th, 2015 13:00
We will need to get the latest firmware for the thin client. Current version is 8.1_027. See below my signature for details.
romesds157
1 Message
0
February 4th, 2016 07:00
RMONTAL VO,
I am sorry but you are wrong. The latest firmware is 8.1_029.
RMontalvo
560 Posts
0
February 8th, 2016 09:00
RomeSDS157,
Thank you for the correction, you are correct, for February, the latest firmware is 8.1_029. Back in December, when I wrote my reply, the latest firmware was 8.1_027.
ManlioB
1 Message
0
February 15th, 2018 04:00
Same issue on Wyse AIO 5040 Thin os, firmware ver. 8.4_108