Hello everyone,

for historical reasons we have older iDRAC systems with a username for admin access which is different from the username on the newer iDRACs which is confusing many times in our team.

In order to resolve this, I changed the username on every iDRAC to one specific with OpenManage Enterprise and this RACADM command:

set iDRAC.Users.2.UserName "username"

Now I also wanted to add a new user with the other username on these iDRACs while keeping the same password using these commands:

set iDRAC.Users.5.UserName "username"

set iDRAC.Users.5.Password "securepassword"

set iDRAC.Users.5.Privilege 0x000001ff

set iDRAC.Users.5.Enable 1

The problem is that it doesn't accept the password because of:

ERROR: Cannot execute the command with Illegal characters.

The password indeed has some special characters, but it's used for the other existing user and I can set this as the password for the new user, using the iDRAC Web-UI.

It would be very nice if someone could tell me how to set this password using racadm in OME because we want to simplify this process and we have a huge amount of Dell Servers where we have to set this.

Thank you <3

Best regards

Chrissy

Nach Forum durchsuchen

PowerEdge Server

Server

idarc / lcc update from bootable media

DELL R420 - iDRAC antwortet nicht - Lüfter drehen mit max Drehzahl

Dell R510 - HDD langsam

Dell R900 PCIE Problem

Firmwareupdate DELL Shared PERC8 Raid Controller nicht möglich (Es wurden keine Aktualisierungen gefunden)

Dell PE R710 friert im Bios Boot ein

PowerEdge R230 Server with latest bios can't get powersave working under linux

Need new HDD with Option "keep your Harddrive" for Dell PowerEdge R610

Schienen für dell power edge 1950

2 more CPU added R810

Dell 2850 Raid defekt

Austauschfestplatte ist fremd

Poweredge R720 meldet Spannungsproblem

Poweredge R610 Battery-Warnung

OMSA Fehler - The Virtual Disk has bad blocks - Logical Drive Windows Disk 1 [RAID-10] needs attention

Dell Supportressourcen

Neueste Lösungen

Laufwerksgehäuse 4x 2,5

Ich kann den Lizenzkey auf dem Server nicht lesen Aufkleber beschädigt!

Setting Password of new iDRAC User doesn't work with RACADM, but via web gui

"Für nächsten Neustart des Servers bereitstellen" als Standard definieren?