
Solved!
Go to SolutionResponses (8)
Solutions (0)
Rainer_EMC
6 Operator
•
8645 Posts
403
0
Posted November 10th, 2008 08:00
I would suggest to contact customer service - esp. if this is the first time you are using that DMX for Celerra storageReply - this is what i have on my DMX3/DMX2000
SCSI Flags { Negotiate_Reset(N) : Disabled Soft_Reset(S) : Disabled Environ_Set(E) : Disabled HP3000_Mode(B) : Disabled Common_Serial_Number(C) : Disabled Disable_Q_Reset_on_UA(D) : Disabled Sunapee(SCL) : Disabled Siemens(S) : Disabled Sequent(SEQ) : Disabled Avoid_Reset_Broadcast(ARB) : Enabled Server_On_AS400(A4S) : Disabled SCSI_3(SC3) : Disabled SPC2_Protocol_Version(SPC2) : Disabled SCSI_Support1(OS2007) : Disabled } Fibre Specific Flags { Volume_Set_Addressing(V) : Disabled Non_Participating(NP) : Disabled Init_Point_to_Point(PP) : Enabled Unique_WWN(UWN) : Enabled VCM_State(VCM) : Disabled OpenVMS(OVMS) : Disabled AS400(AS4) : Disabled Auto_Negotiate(EAN) : Disabled }Reply

dynamox
11 Legend
•
20419 Posts
•
87439 Points
403
0
Posted November 10th, 2008 12:00
http://forums.emc.com/forums/thread.jspa?messageID=603554
http://forums.emc.com/forums/thread.jspa?messageID=594836