Solved!
Go to SolutionG
guanabacoa
165 Posts
0
2924
June 8th, 2010 10:00
Question About Raid type in Centera
Hi
Does any one know how to get the RAID type in Centera Centra star 4.1, i mean, Parity or Mirror.
Best regards
Centera Viewer CLI command "show protection" will show the current protection scheme
Config# show prot
Write Fallback
------------------------------------------
Mirror 0 B -
Parity disabled -
------------------------------------------The above shows the protection scheme is mirroring else Parity (CPP) would be enabled and showing a threshold where anything larger than the threshold would be written in parity. Small objects (250KB or less) should always be written in Mirroring (CPM)
East_TN_EMC
29 Posts
985
0
Posted June 15th, 2010 07:00
If you are on the email list to receive the daily health reports, you can also find this information in the health report.
Protection Scheme(s): CPP,CPM
Protection Threshold(s): 256000,0
In this case, you have CPP with mirrored fallback and a 256K threshold.
Apex_Ops
1 Rookie
•
90 Posts
985
0
Posted July 29th, 2010 06:00
Hi Guanabacoa,
I see you posted a question regarding the raid type on a centera and that your question in this post appears to have been answered. Was this a correct or helpful answer? If so could you please mark the question as Answered (helpful or correct)?
Thanks for your assistance and participation in the Support Forums.
Regards,
Ronan