Can you confirm that your replacement process followed the process in the link below? It's also worth noting that it may take 45 minutes to an hour for the software to update the new controller.
Let's give it a bit more time then and check back on it once it's had a bit longer to finish it's process. It may well be fine at this point, but we should know for certain before long.
The error "an unrecoverable problem was found with caching hardware on controller during system startup" is normally related to a cache battery alert. Usually, when this error happens it is important to facilitate a serial connection to Dell Support level 2 for further troubleshooting because not always a controller replacement is required. Is your Compellent still in warranty?
If you followed the procedure for replacement, maybe the new Controller is faulty or the error was not related to a controller replacement. Can you try to install the old controller and verify if the error persist and the old controller is detected at all?
The cache shouldn't be separate from the controller. With both the original and the replacement reporting this same error, the issue may be with the connecting board. The only components I'm seeing in our database are either controllers, hard drives, or SSDs. If you're still able to get into storage center or storage manager, I don't mind looking at a log collection, but you may be best served talking to phone support. The Compellent systems usually have support options, even with an expired warranty. If that log review is something you'd be interested in having done, go ahead and acquire them, then reply with the file size, so we can find the best way to get them. If you'd like to go ahead and speak with phone support, I'd refer you to (800) 456-3355. I expect that there is a decent chance that I may need to refer you to them, even with a log review, but I did want to offer.
lukehy
1 Rookie
•
61 Posts
2589
1
Posted July 1st, 2021 09:00
Hello Dylan.
sorry for the late reply.
when we replaced the controller we replaced the cache battery as well
and it didnt initialize because the battery was still charging
when we put the new controller in and swapped to the old battery, the old battery charged a little
and the then the controller was initialized and the error cleared.
the issue is resolved.
thank you and to @DiegoLopez for the help!.