UNSOLVED
K
KarolKislenko
13 Posts
0
6988
September 1st, 2011 07:00
PS4000E and Packet Errors
Hello,
Started to get packet errors on my PS4000E.
Errors are only on 1 controller and eth0.
What would be the best course of action to get to the root of this problem? Disable eth0 on controller 1 and see if eth1 starts to get these errors? Disable controller 1 alltogether and see if controller 2 is getting errors?
Thanks in advance,
Karol
Started to get packet errors on my PS4000E.
Errors are only on 1 controller and eth0.
What would be the best course of action to get to the root of this problem? Disable eth0 on controller 1 and see if eth1 starts to get these errors? Disable controller 1 alltogether and see if controller 2 is getting errors?
Thanks in advance,
Karol
KarolKislenko
13 Posts
493
0
Posted September 4th, 2011 10:00
Yes, running FW 5.0.7. Will contact EQL then and report later if that was the case.
Hdejongh
30 Posts
493
0
Posted September 3rd, 2011 07:00
The problems you see are prob crc errors.
There is a hotfix released for that. Please contact EQL support.
If needed i`ll send you a pm with a casenumber..
Regards