UNSOLVED
after deploying OneFS 7.2.1.1
on a virtual 6 node cluster it is impossible to create a second condition in a Smartpool policy.
The 'Create Policy' button will remain greyed out.
If you only choose 1 condition then you can save the policy.
reopening the same policy and apply a second condition will reveal the 'Create Policy' button
but after pressing that, the whole session will 'hang'
Under OneFS 7.1.0.2 all went well creating this kind of policy
is there a known solution for this problem ?
578
0
Posted January 7th, 2016 04:00
Isilon OneFS v7.2.1.1 B_7_2_1_081(RELEASE) installed on all nodes
There is a license:
SmartPools
Evaluation
Not Configured
2016-03-08
Or should that ‘Not Configured’ has somthing to do with it…
Van: Peter_Sero
Verzonden: donderdag 7 januari 2016 13:43
Aan: Dekker, H.J.
Onderwerp: Re: - after deploying OneFS 7.2.1.1
ECN
after deploying OneFS 7.2.1.1
reply from Peter_Sero in Isilon - View the full discussion
578
0
Posted January 7th, 2016 05:00
Strange. Some quick shots but probably someone has seen exactly this before and can help out.
A) Restart cluster or at least web GUI after license activation?
B)
isilon-20 # isi storagepool health
All pools are healthy.
Unprovisioned drives: none
C)
isilon-20 # isi services isi_smartpools_d
Service 'isi_smartpools_d' is enabled.
578
0
Posted January 7th, 2016 05:00
I've found the GUI for Filepool policies to be extraordinarily buggy in both 7.2.1 and 7.2.1.1. The only way I've been able to work with filepool policies under 7.2.1.x is to use the CLI, which is a bear.
578
0
Posted January 7th, 2016 07:00
Due to rebooting the cluster it took some time to settle I suppose.
License is now:
SmartPools Evaluation Configured 2016-03-08
And this is the CLI output:
Isilon OneFS v7.2.1.1
ICL01-1# isi storagepool health
All pools are healthy.
Unprovisioned drives: none
ICL01-1# isi services isi_smartpools_d
Service 'isi_smartpools_d' is enabled.
Van: Peter_Sero
Verzonden: donderdag 7 januari 2016 14:38
Aan: Dekker, H.J.
Onderwerp: Re: - after deploying OneFS 7.2.1.1
ECN
after deploying OneFS 7.2.1.1
reply from Peter_Sero in Isilon - View the full discussion
578
0
Posted January 7th, 2016 07:00
That’s also my experience so far.
It is rather annoying !!
This is what you might expect from a cheap simple system, but not with Isilon….
Welcome to the real world ☺
restore to a previous snapshot is all there’s left to do…
Thanks for all input everyone !
Van: carlilek
Verzonden: donderdag 7 januari 2016 14:45
Aan: Dekker, H.J.
Onderwerp: Re: - after deploying OneFS 7.2.1.1
ECN
after deploying OneFS 7.2.1.1
reply from carlilek in Isilon - View the full discussion
Peter_Sero
6 Operator
•
1169 Posts
578
0
Posted January 7th, 2016 04:00
Does the cluster have a SmartPools license activated?