Hello. Can anyone please help-me to configure a uplink por on S4810? My cenario is the following:

S4810

Default VLAN: 4094

VLAN Database: 1,10,20,100,200

PowerConnect 5548

Default VLAN: 1

VLAN Database: 1,10,200

I connect a fiber between S4810 Te 0/39 and PowerConnect Te 1/0/1
On PowerConnect I configure like this:

interface tengigabitethernet1/0/1
switchport mode trunk
!

On S4810 I configure like this:

interface TenGigabitEthernet 0/39
description Uplink
no ip address
mtu 12000
portmode hybrid
switchport
spanning-tree rstp edge-port
no shutdown
!

The default VLAN works fine, but other vlan are not working.