Today one of our PowerConnect 3348 switches decided to perform a cold boot on its own. I found the following entry in the log file:

Severity: Emergency
Description: %ERHG-F-SEND: FATAL ERROR - in tag,
Can not add IP_Interface_Tab virtual table, The number of 
virtual tables per page passed the maximum (maximum=9). 
***** FATAL ERROR ***** Reporting Task: WBSR. Software 
Version: 1.2.0.6 (date 15-Nov-2004 time 14:22:46) 0x454ec 
0x4551c 0x48140 0x2b6d7c 0x1c5434 0x1c58e8 0x1c946c 
0x1da0ec 0x1da508 0x81394 0x8d434 0x70804 0x70304 0x6fef8 
0x6dad4 0x6f19c 0x6b548 0x6b39c 0x6b30c 0x76f44 0x23ac58 
0x69e4c 0x3cb94 ***** END OF FATAL ERROR *****

I've been searching around, but have not been able to figure out what might have caused this and how to prevent it from happening again. Any ideas?

Message Edited by vskjefst on 08-03-2007 10:25 AM