UNSOLVED

Spectrin

updated

21 years ago

S

Spectrin

11 Posts

0

960

May 9th, 2005 11:00

Networking problems

I have a problem with a home network, below is an explanation of my problem, it may seem complex but I've just tried to put in as much info as possible.

I have tried to set up a home network with two computers:
Computer 1: has XP SP2, norton personal firewall
Computer 2: XP SP2, McAfee virus scan

They are connected using a modem-router, internet access for both is fine.
When I try to access the network (set up using setup wizard, computer 1 browses to it very slowly and returns the message, network path not found. Computer 2 displays computer 1 in the network but will not access it.

I have the IP of computer 2 set to trusted zone in Norton firewall, file sharing is enabled as is NetBIOS.

When I run the network diagnostics for computer 1 the netowrk adaptor fail, when pinging its own address the ping times out.

Can anyone explain what I am doing wrong?
  • volcano11

    2 Intern

    27973 Posts

    131

    0

    Posted May 9th, 2005 13:00

    First, try eliminating the possibility that it is a firewall problem by totally disabling all firewalls.

    Steve

  • Spectrin

    11 Posts

    131

    0

    Posted May 9th, 2005 17:00

    Thanks for your help. Shutting down the Norton firewall sorted it out for me. Can you make any suggestions about how I can configure the firewall to allow the networking?

    Spectrin
  • volcano11

    2 Intern

    27973 Posts

    131

    0

    Posted May 9th, 2005 17:00

    I haven't used the Norton firewall in a number of years, but I seem to recall the best way to do this is to put a range of IP address in the allowable zone.  Have you tried the user's guide that came with Norton?

    Steve