Solved!
Go to SolutionU
User404404
1 Rookie
•
34 Posts
0
1550
September 10th, 2021 01:00
Users scripting cli on Idrac9 since v.4.40
Hello Fellows,
I have trouble for scripting my "idrac users" via CLI with the new command cfg.
Could someone help me for translate my "old script" on v.4.40 / 5.00+ ?
Old script :
config -g cfgUserAdmin -o cfgUserAdminUserName -i 3 TOTO
config -g cfgUserAdmin -o cfgUserAdminPassword -i 3 TITI
config -g cfgUserAdmin -i 3 -o cfgUserAdminPrivilege 0x1ff
config -g cfgUserAdmin -i 3 -o cfgUserAdminIpmiLanPrivilege 4
config -g cfgUserAdmin -i 3 -o cfgUserAdminIpmiSerialPrivilege 4
config -g cfgUserAdmin -i 3 -o cfgUserAdminSolEnable 1
config -g cfgUserAdmin -i 3 -o cfgUserAdminEnable 1
I have tried with some others commands as "set idrac.users.3" or "set -g cfgUserAdmin.3" but nothing works..
Can anyone help me with this script please ? Thanks in advance ,-)
User404404
1 Rookie
•
34 Posts
1243
0
Posted September 10th, 2021 06:00
Thanks a lot : works like a charm !
DELL-Shine K
6 Operator
•
3042 Posts
1247
0
Posted September 10th, 2021 04:00
You can try below set of commands for same
racadm set idrac.users.3.UserName TOTO
racadm set idrac.users.3.Password TITI
racadm set idrac.users.3.Privilege 0x1ff
racadm set idrac.users.3.IpmiLanPrivilege 4
racadm set idrac.users.3.IpmiSerialPrivilege 4
racadm set idrac.users.3.SolEnable 1
racadm set idrac.users.3.Enable 1
To see the configuration you can run below command
racadm get idrac.users.
racadm get idrac.users.3