How many HDD can this system take,I ask because I want to add an extra drive with out taking out any of the drives at present in the computer (2 off). Any help would be appreciated.Regards.Johno65
Dimension 4600 System Board Connectors are as follows:
Primary IDE channel 40-pin connector
Secondary IDE channel 40-pin connector
Floppy drive 34-pin connector
Serial ATA (2) 7-pin connector
The Dimension 4600 supports up to 4 ATA/100 devices on 2 IDE channels. However, it has brackets/casing for two internally accessible hard drives only. So, if you do connect a third hard drive internally, there would be no place to secure it within the system chassis ( as the hard drive bays can hold only 2 hard drives) and it would be hanging out of the system. Alternately, you may connect external USB hard drives as per your requirements on the system.
Please reply if you have further queries.
Thanks and regards.
Babita S #iworkfordell To know more about Dell Product Support, Drivers & Downloads, Order & Dispatch status -> choose your region US Customers; UK Customers; India Customers. For Dell support videos click Here.
As per system specifications, you can add upto two internally accessible and 3 externally accessible hard drives on your Dimension 4600.
Drives:
Externally accessible: two 5.25-inch bays one 3.5-inch bay Internally accessible: Two bays for 1-inch–high IDE hard drives
Please reply if you have further queries.
Thanks and regards,
Babita_S #iworkfordell To know more about Dell Product Support, Drivers & Downloads, Order & Dispatch status -> choose your region US Customers; UK Customers; India Customers. For Dell support videos click Here.
Set the hard drives jumpers to "Cable Select". After the physical installation of the hard drive, check in the setup, that the hard drive is set to auto [on] and in order for windows to recognize the second hard drive, it must be partitioned and formatted, using Windows Disk Management.
Note: You may need to buy an 18" IDE, 80 wire, three 40-pin connector data cable, similar to this:
Thanks for the reply at the moment the Dell has two drives one of 80gb and one of 60gb.I am running Windows XP and what I would like to do is add a 500gb Hard Drive as well as keeping the two Hard Drives all-ready in the Dell,so effectively I would be running three drives in total is this possible .The drives are all of the IDE type.Regards.John.
Hi Johno65,
As per system specifications, you can add upto two internally accessible and 3 externally accessible hard drives on your Dimension 4600.
Drives:
Externally accessible: two 5.25-inch bays one 3.5-inch bay Internally accessible: Two bays for 1-inch–high IDE hard drives
DELL-Babita S
4 Apprentice
•
1313 Posts
899
0
Posted September 3rd, 2013 08:00
Hi John,
Thank you for your reply.
Dimension 4600 System Board Connectors are as follows:
The Dimension 4600 supports up to 4 ATA/100 devices on 2 IDE channels. However, it has brackets/casing for two internally accessible hard drives only. So, if you do connect a third hard drive internally, there would be no place to secure it within the system chassis ( as the hard drive bays can hold only 2 hard drives) and it would be hanging out of the system. Alternately, you may connect external USB hard drives as per your requirements on the system.
Please reply if you have further queries.
Thanks and regards.
Babita S
#iworkfordell
To know more about Dell Product Support, Drivers & Downloads, Order & Dispatch status -> choose your region US Customers; UK Customers; India Customers. For Dell support videos click Here.