Hello, Until my previous Alienware I was using Acronis to backup the image of my SSD in NVME but now I have 2 in RAID 0 , after trying to boot from a Hiren pen drive , I run Acronis and it did not detect the RAID 0 SSDs. I wonder what application are you using in this case configuration ( except Alienrespawn ). Thanks for your help in advance. Salvador

Your bootable image capture environment probably needs a newer version of the Intel Rapid Storage driver. I've never used Acronis before, but I would imagine it offers some way to inject drivers into the bootable media it builds for exactly this type of use case. I personally use Macrium Reflect, which has a free version if you want to use it, and its Rescue Media Builder application definitely allows you to add drivers, although by default it will copy necessary drivers right out of your Windows environment into its Rescue Media build.Out of curiosity, have you benchmarked your RAID 0 setup? The reason I ask is that a single modern NVMe SSD can basically max out a PCIe x4 interface on its own, and even though both M.2 slots in that system have an x4 interface available, typically systems with dual M.2 slots are wired to a PCIe switch that only has an x4 interface back to the chipset rather than an x8 interface, because the chipset only has a certain number of PCIe lanes available to be allocated across the entire system. If your system as that setup, then either NVMe SSD would be able to use the full x4 bandwidth, but the total bandwidth across both SSDs will still only be x4, not x8. In that case, you'd get little to no performance benefit from running a RAID 0.

Hello I will review the application you mention. On the RAID 0 configuration thanks for the information. It was one of the configuration offered by Dell when I bought it, it was cheaper and thought it was faster... but now I dont know. I have benchmarked once and the total output was 3200 Megabytes/second. I dont remember the application used, but if you have one free in mind I can test it.

‎502 EPA WARNING | DELL Technologies

Start a Conversation

UNSOLVED

HerthaBSC

updated

21 years ago

HerthaBSC

3 Posts

3748

September 26th, 2005 04:00

502 EPA WARNING

I received this message on the internet. It tells me what my IP address is, what service I am using, and the y know what I am connected through.It also says that all that I do on the internet is being stored and is being "watched". "Further investigation is very high"

It says I should download a 150$ program to remove files on my computer. Should I buy this program ?

What should I do ? I read the other 502 posts and everyone says its a scam. so how do they have all this information about my computer ?

502 EPA WARNING

Dell Support Resources

Latest Solutions

Aurora R10, BIOS out of date issue with Warzone

OEM certificate

Want to Request GeM Authorization Certificate for ternder in GeM Portal

I Have Suddenly Been Abandoned By Dell Leasing

Precision 7920 Tower, compatible with NVIDIA Quadro K6000 12 GB GPU?