UNSOLVED

Moorecards

updated

23 years ago

M

Moorecards

16 Posts

0

10258

March 1st, 2004 18:00

Error Code can't boot

this is the error code:

autochk program not found. skipping autocheck.
 
 
STOP: C000021a {Fatal System Error} The Session Manager Initialization system process terminated unexpectedly with a status of 0xc000003a (0x00000000 0x00000000). The system has been shut down
 
 
I need to get my infor off old HD  from reading the net it has been recovered from but I don't understand
Brand New Dell 8300 less than 2 weeks old
  • Mary G

    6 Operator

    •

    20095 Posts

    481

    0

    Posted March 1st, 2004 19:00

    You need to post more info. What are you trying to do? What have you already done? Did you install the old drive into the new computer or is the error on the old computer? If you're having trouble with the new computer, call Dell for assistance.
  • Moorecards

    16 Posts

    481

    0

    Posted March 1st, 2004 19:00

    was editing a photo when it came up  with a blue screen bad pool caller then did a memory dump then on reboot that code came up...

     

    I took the new drive from the Dell and installed it as a slave in my old PC shows up in BIOS & Device manager but not in My Computer .. so I can't access it..  and call Dell  you got ot be kidding I have called so many times to be lied to hung up on transfered to wrong places and they still can't help except to send a new HD and I lose all my files on a PC less than 2 weeks old ( wasn't even finished setting it up with everything from old PC) this happen a little over a week after I got it..  I have seen where it says how to but on the net but I don't understnad it all and I really think on a brand new PC Dell ought to be more helpful  

  • BBlackie

    426 Posts

    481

    0

    Posted March 2nd, 2004 12:00

    Perhaps the information in the following link will correct the problem.

    http://www.annoyances.org/exec/forum/winxp/t1027465246

    If not, I suggest going to google and search on 0xc000003a for a variety of other fixes.

  • maxd

    2 Intern

    •

    2434 Posts

    481

    0

    Posted March 2nd, 2004 17:00

    There are some MS links that appear to be relevant to your problem but it would be easier to do a clean install. Could not find one definitive answer. Causes range from bad device drivers to IRQ problems. I would first make sure your Ram is ok by reseating first module, test boot, and add one stick back at a time. Be careful of static or you'll have more to worry about than a clean install.

    Then I would boot to CD/Recovery Console and see if any of these commands help.

    chkdsk /r, fixboot, fixmbr (There could be a loss of data with the last 2)

    If none of those help try a Repair Install. Last suggestion, Repair registry.

    http://support.microsoft.com/?kbid=307545

     

  • Moorecards

    16 Posts

    481

    0

    Posted March 2nd, 2004 17:00

    thanks for all the replies  nothing worked  Dell did install a new HD but that still hasn't help me get my files off the old HD  will keep on working until I figure it out
  • Moorecards

    16 Posts

    481

    0

    Posted April 11th, 2004 15:00

    just an update  before I sent the defective drive back to Dell  I bought a program GetDataBack .. and it did the job .. got all my files from the crashed HD before I had to send it back to Dell