2 Posts
0
778
August 2nd, 2021 05:00
Aurora R10, Oloy RAM?
I didn't let it sink in after many of the issues surrounding adding ram to my R10. Purchased the 16GB HyperX Furry Black 16GM 3200MHz DDR4 thinking it would be a match to the Dell OEM X3MCJ 16GB in my system. Nope! Not a match with different timings. I just received a price for OLOy Blade 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 3600 (PC4 28800). Has anyone used the OLOy brand in their R10? Any discussion on the functionality and stability of this specific RAM in the R10? Any help would be appreciated.
No Events found!
Jaxsonnz
62 Posts
0
August 2nd, 2021 16:00
Traditionally yes, but the newer series of R10s seem ok with the HyperX Fury ram too, possibly even more so than the older original R10 boards.
Vanadiel
8 Professor
•
7.1K Posts
•
29.7K Points
0
August 2nd, 2021 05:00
There is a large thread dedicated to the R10 and memory configurations.
Be aware that what works for 1 person, might not for another. The only official supported memory for the R10 is the validated memory.
R10 Memory thread
R10 validated memory
JOcean
11 Legend
•
12.6K Posts
•
69.5K Points
0
August 2nd, 2021 05:00
The most compatible RAM for Dell systems has always been Crucial. The RAM for your system can be found on this web page.
Jaxsonnz
62 Posts
0
August 2nd, 2021 16:00
Confirm you are running the latest bios version 2.1.3 and test again under OC1.
The Dell support app didn't suggest there was a newer firmware so I didn't go looking. There is and it sorted all my issues. Now passing all memory tests, both windows and dell preboot diagnostics memory checks.
Sandman56
2 Posts
0
August 3rd, 2021 06:00
Thank you very much for the information on the HyperX Fury ram. I read all the threads pertaining to the Aurora R10 memory. With that information I decided to order the following ram: HyperX Fury Black 32GB 3466MHz DDR4 CL17 DIMM (Kit of 2) HX434C17FB4K2/32. I hope this is the right ram which I will find out after I install it later today. I will remove the OEM 16Gb stick and add the 2 sticks of HyperX Fury. I will post an update after I get the results and run Cpuid CPU-Z to obtain test results. Thank you again for the help.