Unsolved
1 Rookie
•
2 Posts
0
172
Aurora R16, aftermarket ram?
Just got the Aurora R16 with 14th Gen i7. Hindsight should have purchased with 32G of ram. Now looking for someone who knows absolutely what aftermarket ram would work with the system without xmp? OEM ram very expensive.
redxps630
7 Technologist
7 Technologist
•
10.6K Posts
0
April 13th, 2024 21:35
user validated ram for R16
redxps630
7 Technologist
7 Technologist
•
10.6K Posts
0
April 13th, 2024 21:46
the most popular is HMCG78AGBUA081N 2x16GB
the 84N is also good.
https://www.userbenchmark.com/UserRun/66984875
(edited)
Guy235
1 Rookie
1 Rookie
•
2 Posts
0
April 13th, 2024 21:58
@redxps630
Thanks,
I have: the HMCG78AGBUA084N hynix 1 stick 16GB
I will go through the list you sent. The 81N sold out on Amazon :(
jheales
1 Rookie
1 Rookie
•
19 Posts
0
April 16th, 2024 12:32
Same system and same problem. I wanted RGB ram so just bought Kingston FURY Beast RGB 32GB 5600MT/s DDR5 CL40 DIMM (Kit of 2) XMP. I'll let you know how I get on. DELL sells Kingston Fury non-RGB on their parts list, so thought that this would be the most likely compatible.
loquitus
1 Rookie
1 Rookie
•
4 Posts
0
April 17th, 2024 04:27
@jheales Any luck? Just got my Aurora R16 and was planning to upgrade to 128GB except there are only two slots and they max out at 32GB each, so I am stuck with 64. I only bought 32 to start with, since I expected to replace them anyways.
Now I need to do an after market upgrade. How was your Kingston Fury Beast RGB? What speed did you get? Total 64 GB?
(edited)
jheales
1 Rookie
1 Rookie
•
19 Posts
0
April 17th, 2024 12:54
Just installed my Kingston FURY Beast RGB 32GB 5600MT/s DDR5 CL40 DIMM (Kit of 2) XMP memory and now have 32Gb system memory. But running at 4800MT/s instead of 5600MT/s. Also getting the Kingston CTRL lighting software to save a default apart from bright red was a struggle but finally managed to get that going. How do I get the new RAM XMP3 to work?
Tri Hua
1 Rookie
1 Rookie
•
2 Posts
0
June 5th, 2024 16:49
I got upgraded to 64GB Ram, it's working well. People said in another topic was to choose the RAM with 5600 base speed, instead of having 4800 and then need to enable XMP profile to get to 5600MHz
I upgraded using Crucial Pro DDR5 RAM 64GB Kit (2x32GB) 5600MHz. It showed the RAM speed 5600 (which is max speed of CPU 14700) without needing XMP profile (I think Dell is still not enabling XMP3 profile enabled at the moment)