Unsolved

6 Professor

 • 

1.8K Posts

954

January 14th, 2021 19:00

Aurora R4 Area-51 R2 Reprogramming Tool for Bricked Corrupted BIOS

File this post under 'wild goose chases & last resorts'

I've heard many reports over the years of Aurora R4 Bios updates gone wrong = a bricked mthrbrd, black screen of death etc, I've even seen a few Area-51 R2 mthrbds brick, or call it a corrupted Bios

'Blind Flashing BIOS' is a google search term u can look into ...

Below is 'Bios programming' w/a USB tool which is different ...

r2 bios.jpg

On the Redditware forum is a story about a 51 R2 who's Bios spazzed out & was brought back to life w/ a USB Bios Programmer Tool, I know nothing about it, I do not know if it will work & do not wish to discuss it any further ***Use the information & tools below at your own risk***

______________________

So about two months ago I decided to upgrade my ram and I needed to reset the cmos on my Area-51 R2. Somehow that corrupted my bios (look at my older posts if you want to see) Decided to buy a little usb re-flashing tool and see what happens. Turns out it worked! This alone has made my 2021 so far!

The post is new, u can follow it along as info updates, for now this is what I hear:

*You have to flash the chip itself with a special tool on another computer with windows. I used a MacBook Pro running Bootcamp and it worked perfect. Here's the tool 

Link is to Amazon, cost = $10.50/US, search = Organizer SOIC8 SOP8 Flash Chip IC Test Clips Socket Adpter Programmer BIOS + CH341A 24 25 Series EEPROM Flash BIOS USB Programmer Module (Double Clip+ USB)

*You cant use the .exe file from dells website. You have to use a archive file like a .bin or a .rom that is NOT corrupted. Try to find one online to download if you cant use the took to make a good backup

*I believe in some cases you can extract the .bin from the .exe from dell, i don’t remember the name of the software, but i didnt need to because someone already posted a bios dump here https://www.win-raid.com/t4150f16-Help-needed-Alienware-Area-R-BIOS.html

*The file you flash needs to be an archive of the same model someone else already dumped. I used this guide https://www.win-raid.com/t4150f16-Help-needed-Alienware-Area-R-BIOS.html and this youtube video to help https://www.youtube.com/watch?v=4qX2zihB6UE

The pc had power but would refuse to post. Lights/fans were on but never any video no matter what psu, cpu, ram, gpu I tried

_________________

Ok, so there it is

-->do your own research & use at your own risk<--

_________________

LordZog's Aurora R4

BIOSA11.rar

As an afterward, LordZog tried to help w/a bricked Aurora R4 mthrbrd but then he had a family tragedy & left the forum & I havent seen nor heard of him since, that 5year old AlienArena post is here Aurora R4 Bios Bricked. Need Help flashing.

Of Note, Zog said:

"You can't flash using tools, you have to do a blind flash as it's going to flash using bootblock recovery from a USB drive and a certain file as the BIOS file.. Unless you have a hardware programmer, that's the only way to do it if you have a bad flash and no POST"

I have no input into any of this, other than I downloaded the file he posted on page 2 and later deleted, he named it BiosA11.rar, read that Arena forum post to find out what it is & what it's for, I have no comments other than -->***use at your own risk*** --> it's now available at dropbox

https://www.dropbox.com/sh/aw1p3wuxlyk0mxj/AABR4VxD8wDneECYTt5mGOLba?dl=0

No Responses!
No Events found!

Top