Unsolved

This post is more than 5 years old

1 Message

916

November 22nd, 2019 10:00

Aurora R6, upgrade HDD, #4

I have an Alienware Aurora R6 that has a solid state drive with windows and all my software installed and a 2nd regular HDD for files & stuff. Is it possible to upgrade/replace that hdd with a ssd instead?

Would this be a difficult upgrade to make? ...or is it better/easier to install a third drive? I'm not even sure if adding a 3rd is an option for this model. I don't really have any experience with this sort of thing. Are there any good tutorials I should check out? Any tips or recommendations would be appreciated.

I'm wanting to get Red Dead 2 but don't quite have the 150gb free on the ssd to install it.

Thanks

11 Legend

 • 

12.6K Posts

 • 

69.5K Points

November 22nd, 2019 12:00

You can add a 2.5" SSD and keep the drives you have now. Check to make sure you have the needed cables and adapter as pictured in this support site.

Table 1. Storage specifications

Interface SATA 6 Gbps
Externally accessible One 5.25-inch drive bay for DVD+/-RW drive, Blu-ray Disc combo (optional), or Blu-ray Disc writer (optional)
Internally accessible
Solid-state drive (SSD) One M.2 SATA drive

NOTE: : If you purchased an M.2 drive, it is assigned as primary drive and all other SATA drives in your computer are assigned as secondary drives.

U.2 drive One optional U.2 drive installed in 3.5-inch HDD bay.
One 3.5-inch drive bay For one 3.5-inch SATA drive or two 2.5-inch SATA drives (optional)

NOTE: : If your computer is shipped with only one 3.5-inch SATA drive, it is the primary drive. If your computer is shipped with two 2.5-inch SATA drives, one is primary drive and the other is secondary drive.

Two 2.5-inch drive bays For two 2.5-inch SATA drives

NOTE: : The SATA drives installed in these drive bays are secondary drives.

Capacity  
  SSD Up to 1 TB
  U.2 Up to 960 GB
  Hard drive Up to 2 TB
No Events found!

Top