Aurora R8, Case Swap, #3

Nice, the matx board probably takes up 1/4 of the real estate in there.

Did you jump the pins on the USB 3.0 headers to bypass the ePSA post error?

Lol you about that .And no not yet .still running wires .And adding  more fans 

Drop everything in a Obsidian 1000d super tower .Now it does not even register  on the Db meter

======================

Nice case for a custom build.

I also like the gray platform underneath. 

Nice @TRIMIX101 

Looks like you replaced the R8 AIO cooler, I guess the hoses were too short 

Did you wire the power cable from the case to MB or keep the R8 Led wire and   power assembly ?

More photos

Nice job on the case swap. I'm not sure if you saw my case swap guide but I wouldn't be lying if you took my advice and decided to go with a big boi case

But it looks like it works due to the fact that you can actually fit a much larger radiator. The only weird thing that I can't  quite see form the picture is that the PSU is mounted beside the MB which leaves a big mess with the cables. Otherwise, nice job on the swap.

I used everything  for now! PSU is right by the MBO wires where to short I had to  mickey mouse it in there .The CPU cooler works but get a post error for right now