1 Rookie
•
11 Posts
0
73
AW2723DF, LEDs not working
Hi. I have Dell Alienware AW2723DF. But leds not working. Monitor is plugged to Xbox Series X by hdmi.
No leds in back of monitor and no leds in power button. Monitor working but just no leds.
Is that i plugged wrong or its faulty?
Vanadiel
6 Professor
6 Professor
•
6.4K Posts
0
August 6th, 2024 01:17
@sew333 Looks like you also need to plug in the USB 3.1 supplied cable that came with the monitor.
Page 51 of the manual for OSD lightning zones control.
Vanadiel
6 Professor
6 Professor
•
6.4K Posts
0
August 6th, 2024 01:26
@sew333 Yes, if you install AWCC. But they will also work on your xbox if you use the OSD and plug in the supplied USB cable to the monitor USB hub.
Vanadiel
6 Professor
6 Professor
•
6.4K Posts
0
August 6th, 2024 00:58
Are they set up from the OSD? Normally you would use AWCC to control them, but since you are hooked up to an Xbox you would not have AWCC.
sew333
1 Rookie
1 Rookie
•
11 Posts
0
August 6th, 2024 01:01
Ah so what now to do? i dont touch anything in OSD
sew333
1 Rookie
1 Rookie
•
11 Posts
0
August 6th, 2024 01:22
oki thanks. Also i can live with that. And in this year i will be plugging new pc with rtx to this monitor. So with new pc, leds will be working?
Actually its console
(edited)
sew333
1 Rookie
1 Rookie
•
11 Posts
0
August 6th, 2024 01:28
oki thanks so much : ))))))))))))))))
sew333
1 Rookie
1 Rookie
•
11 Posts
0
August 6th, 2024 05:48
Hey i checked and monitor is plugged by USB. So why leds are not working>?
sew333
1 Rookie
1 Rookie
•
11 Posts
0
August 6th, 2024 06:07
Update: LEDS ARE WORKING. In monitor OSD they was on OFF. : )