Alienware model? boot failure, cannot detect device

Question

Hello,Recently every time starting, the PC will go into Boot mode and mentioned two of below randomly. 1. Boot failure on device. 2. No hardware issues detected. No boot device detected Sometime randomly, the PC will start normally. But most of the time, Boot Failure will happen. I tried Legacy mode and turned off the IPV4&6 but still nothing. UEFI mode is the default. Thank you.

JOcean · Answer

What specific Alienware model? Run diagnostics. It could be the HDD/SSD is failing. Restart the system and at the Alienware splash logo start tapping F12. Run full diagnostics and watch for any drive errors.

NEMOCAPO · Answer

Hi, i have run the checked and no disk failure detected. Only battery recommendation received. thanks.

Alienware

Was this post helpful?