Unsolved
This post is more than 5 years old
15 Posts
0
10964
February 17th, 2012 09:00
vCenter Plug-in not sending alerts from m1000e
Question - how do I change the SMTP settings on the blade chassis? I'm having an issue that the vCenter plug-in won't send alerts from the blades. I was able to fix the issue by changing the EnvEventSource from indicators to sensors on my rack mounted servers and I did the same on each of the blade servers but it is still not working there. Is there a way to change this value on the chassis?
Here is the output from vicfg-snmp.pl run against the host:
Current SNMP agent settings:
Enabled : 1
UDP port : 161
Communities :
public
Notification targets :
@162/public
Options :
EnvEventSource=indications
Thanks in advance.
No Events found!
Kong Yang
180 Posts
0
February 20th, 2012 08:00
TJ,
Have you tried the fix suggested by fellow DTC community member, Quatious, en.community.dell.com/.../default.aspx
Here is Quatious' fix: en.community.dell.com/.../20042744.aspx
TJ_Ferguson
15 Posts
0
February 20th, 2012 10:00
Yes and that is the fix that worked on the rack mounts but is not working for my blade servers. I was hoping to get some help in how to make the SMTP change on the chassis. I have made it on the individual blades already but not the chassis.