cannot create tree quota

Question

I have 2 NSG40 repl v2. Both have sym_std pool which is almost full have only 80GB available space on source and 200GB available on target ( potential storage is bit more and AVM is avalable) Now therew was already an FS replicating fs_test_001 between the two. FS is 90% full. I extended the above fs_test_001 by 1024MB  successfully, both source and destianation are at same size. I am trying to create now a tree quota : /abc/xyz/fudge with hard limit of 10MB and it has just stuck giving the below error: I don't know whats causing this as 10MB of data is still ok, i guess. Another quesiton : What is the minimum threshold i should keep in a FS or SAvPool before issues start like backup fails etc. Severity: Warning Brief Description: Slot 2: Source=275_00029010_0180_467_00029010_0182(alias=Repln_fs_test_001), starting transfer. Destination has no space available. Source is retrying. Full Description: The system tried to start the data transfer but there was not enough object space or SavVol space available on the destination side. Recommended Action: Ensure that the destination object and SavVol space is extendable on the destination side using the nas_fs -info -all command. The system will start data transfer when space becomes available. Message ID: 86174859288 Thanks for your help.

Rainer_EMC · Answer

doesnt look like this warning is an error from creating a treequota

most likely you are trying to create a treequota deeper than at the root of the file system or the directory already exists

but it looks like your replication is currently not transfering - I would suggest to open a service request

Celerra

Was this post helpful?