Celerra / Access Based Enumeration

Question

Hi, Since Win2k3 SP1 it's possible to use Access Based Enumeration, so that user's can see only the files they have access to. All the other files and/or folders will remain hidden. Is such a feature supported? If yes, how do I enable this? Is this just a Samba thing? Thanks!

Rainer_EMC · Accepted Answer

Version : 5.5.24 ok. so you do have 5.5When your CE upgraded your system to 5.5 he should have given you copies of the following CD's:DART 5.5.xTools & AppsCAVA (if licensed)ISCSI Utilities (if licensed)documentation (also available from Powerlink)Linux ISCSI snap API (not sure if there is an ISO or just the RPM)I suggest you take one of the ways mentioned by Bill in http://forums.emc.com/forums/thread.jspa?forumID=86&threadID=79768 to CD's that match your releaseremoved temp. ftp locationRainer

dynamox · Answer

it's definitely supported. If you look around your CDs that came with your Celerra, there should be a cd with Celerra CIFS tools. On the cd there is a file called emcabe. There is also a little text file that shows the syntax. You can enable ABE based on share or per CIFS server.

Rainer_EMC · Answer

yes, ABE is implemented in Celerra and the emcabe.exe is located on the Celerra Applications and Tools CD at CifsTools
as\cifs\sharedup
t\emcabe.see attached for how to use it to enable ABE

martijnkools · Answer

Hi,Thanks for the information! Will check it out!Rgds,Martijn

martijnkools · Answer

Hi all,Thanks for your support so far. I checked out all the CD's that came with the Celerra and there is an application and tools CD but i can't find the ABE utility on any of the CD's.Would it be possible for any of you to sent me that utility?Thanks in advance!!Rgds,Martijn.

martijnkools · Answer

Thanks for your reply!Yes I have that CD and searched for the filename, but it's not there.

Rainer_EMC · Answer

If you have the Tools and Apps CD - its located there in \CifsTools\emcabe
t\emcabe.exe

martijnkools · Answer

I have:cifstools \emcaclemcopylgdupntmigratsharedupunicacltoolsusrmapperV3Could it be that i have an old CD?I have celerra network server version 5.4.14.3 Applications and tools cd.

martijnkools · Answer

Thanks for your help Rainer! This is what the output says:

Name : emcnas Relocations: /nas
Version : 5.5.24 Vendor: EMC
Release : 2 Build Date: Wed 11 Oct 2006 10:14:39 PM CEST
Size : 474754472 License: EMC Copyright
Packager : EMC Corporation
URL : http://www.emc.com
Summary : EMC nfs base install

Rainer_EMC · Answer

what DART code are you actually running ?see 'nas_version -l' or 'server_version ALL'ABE was implemented starting in 5.5 - so if you are indeed still running 5.4 the util wont help you

martijnkools · Answer

Rainer, thank you so much! I will see if we can get the newer cd's! Thanks agaiN!

Celerra

Was this post helpful?