Celerra nslookup errors

Question

Hello,

When i run this commands i am getting the below errors. I have no clue why it is not able to resolve the DNS IP address. the DNS server is up and running... what other issues may cause this errors

[nasadmin@mpannsgw1 ~]$ nslookup

> mpannsgw1

Server: 192.168.99.5

Address: 192.168.99.5#53

** server can't find mpannsgw1: SERVFAIL

> 192.168.14.73

Server: 192.168.99.5

Address: 192.168.99.5#53

** server can't find 73.14.168.192.in-addr.arpa: NXDOMAIN

> 192.168.14.73

Server: 192.168.99.5

Address: 192.168.99.5#53

** server can't find 73.14.168.192.in-addr.arpa: NXDOMAIN

bonnu06 · Answer

Yup i can see the 2 IP's in the resol.conf file and as you here all this is related to this error

[nasadmin@mpbwnsg1 ~]$ date;nas_cel -e id=3 "nas_fs -l";date
Mon Jul 12 14:57:52 EDT 2010

Error 2241: Remote command failed:
remote celerra     = mpannsgw1
remote exit status = 0
remote error       = 4446
remote message     = CURL Error code: 35, Error message: error:14077438:SSL routines:SSL23_GET_SERVER_HELLO:tlsv1 alert internal error
Mon Jul 12 14:57:53 EDT 2010

Any idea on this?

dynamox · Answer

Do you see your dns servers in /etc/resolv.conf ?

SAMEERK1 · Answer

Please refer this primus  emc134484, hope this will be helpfull for you. Let me know if this doesnt corresspond the exact issue. Sameer Kulkarni

bonnu06 · Answer

I did try this primus but no luck......

bonnu06 · Answer

I did add the the Celerra IP in the DNS file and nslookup isssue is resolved bbut this issue is long lasting one

[root@mpbwnsg1 nasadmin]# date; nas_cel -exec id=3 "nas_fs -l"
Wed Jul 7 12:35:10 EDT 2010

Error 2241: Remote command failed:
remote celerra     = mpannsgw1
remote exit status = 0
remote error       = 4446
remote message     = CURL Error code: 35, Error message: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number

SAMEERK1 · Answer

nas_cel -update id=3 please run this command and try running your previous command and let me know. Sameer

SAMEERK1 · Answer

Can you please let me know what is the nas version on both the Celerra? Sameer Kulkarni

SAMEERK1 · Answer

Let me confirm I am not very sure of this command, if I am not wrong you are trying to exec the command 'nas_fs -list' on the Celerra with the id=3, am I correct? Sameer Kulkarni

bonnu06 · Answer

This is the version on both the celerra's [nasadmin@mpbwnsg1 ~]$ nas_version5.6.40-3

SAMEERK1 · Answer

Are you doing nslookup for the local host, i.e. local Celerra? are you able to ping the DNS server, please make sure that everything is fine from the network side Sameer Kulkarni.

bonnu06 · Answer

I did run the command and ran the nas_cel -exec command but no luck the error keeps on coming back...

bonnu06 · Answer

Yes you are correct.....

SAMEERK1 · Answer

please check wether the interconnect is woking if its not  the production box or nothing is running on that you can re-create the same and check. Sameer Kulkarni

SAMEERK1 · Answer

have you checked with the interconnect? Sameer Kulkarni

JGreen · Answer

Are the control station clocks in sync or within 5 minutes of each other?

Celerra

Celerra nslookup errors

Was this post helpful?