Unsolved
This post is more than 5 years old
4 Posts
0
758
November 17th, 2006 07:00
Celerra Replication - Reverse not working
Hi
Has anyone seen this before.
I can fail over a replication no problem but once failed over restart fails with an "unable to connect message".
Reverse also fails with a "failed to connect message" also "failed to recover from failure to perform replicationoperation".
Celerras are at 5.5, time is within 10 minutes, replication works the other way....
I have followed the documentation to the letter and fear something else must be wrong here.
Thanks
Has anyone seen this before.
I can fail over a replication no problem but once failed over restart fails with an "unable to connect message".
Reverse also fails with a "failed to connect message" also "failed to recover from failure to perform replicationoperation".
Celerras are at 5.5, time is within 10 minutes, replication works the other way....
I have followed the documentation to the letter and fear something else must be wrong here.
Thanks
0 events found
No Events found!
ironman4
14 Posts
0
November 21st, 2006 07:00
I noticed no one has answered your post so I searched our knowledgebase. I really could not find any solutions to your problem.
I suggest (if you have not done so already) you contact the EMC Support Center for assistance. This type of problem seems a little beyond what a forum could answer. In addition, log files will probably have to be exchanged, etc.