Unsolved
This post is more than 5 years old
2 Intern
•
258 Posts
0
744
February 3rd, 2011 07:00
Celerra Storage usage notifications
Hello,
We have a bunch of filesystems and i would like to create email alert notifications from the command line because i created them in GUI and its not sending us the alerts. Is there a way to do this?
0 events found
No Events found!
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
February 3rd, 2011 09:00
It should work regardless where you are creating them from, is SMTP server ip address setup in Celerra Manager ?
umichklewis_ac7b91
300 Posts
0
February 3rd, 2011 09:00
It's possible from the command line, but if it's not working from the GUI, there's a chance something is not configured. Have you checked your email settings? If you click on the Test button in the GUI, it will immediately send a test message. If the test messages aren't arriving, I think you've got an email issue.
If you do get the email, but you're not being notified when the alert occurs, can you describe what's no working?
Karl
MJ991
32 Posts
0
February 5th, 2011 17:00
What is your DART version..if it is under 5.6.45 there is bug which is causing SNMP trap notifications configured through Celerra Manager GUI are not working..
Please verify below primus case if your DART version is lower than 5.6.45
emc217192