Thanks a lot, gained a lot of info from those threads. Here in our environment, we have a NS80G with NAS code of 5.5, so what could be the requirements for DART code and how many LUNS would the code have taken from the backend storage.
for DART 5.5 its six LUNs with 30GB (2x11GB 4x2GB) DART 5.6 increased that so it might be better to already plan for the 5.6 sizes
Please contact EMC customer service - they will check all the prerequisites, tell you the exact settings for your model and normally also install DART for you
dynamox
9 Legend
•
20.4K Posts
0
February 14th, 2009 23:00
http://forums.emc.com/forums/thread.jspa?messageID=607597
DART code requirements depend on the model and dart level you are going to.
Kushi2
1 Rookie
•
82 Posts
0
February 15th, 2009 11:00
Here in our environment, we have a NS80G with NAS code of 5.5, so what could be the requirements for DART code and how many LUNS would the code have taken from the backend storage.
Rainer_EMC
4 Operator
•
8.6K Posts
0
February 16th, 2009 00:00
for DART 5.5 its six LUNs with 30GB (2x11GB 4x2GB)
DART 5.6 increased that so it might be better to already plan for the 5.6 sizes
Please contact EMC customer service - they will check all the prerequisites, tell you the exact settings for your model and normally also install DART for you
regards
Rainer