DIC error in response to nas_cel -interconnect -validate

I think I remember seeing this. Look at the /nas/site/cshosts file and replace 'localhost' with the hostname of your virtual Celerra.

Thanks Doug - but that's not it. /nas/site/cshosts looks good (correct hostname, correct IP, correct serial number)

OK, I would check time synchronization between the Celerras. TO see how I got mine to (mostly) work, check out this forum post.

https://forums.emc.com/forums/thread.jspa?threadID=91469&tstart=0

Ok - after a LOT of digging - I got this resolved.

First - DIC errors are caused by IP connectivity issues between the datamover (not sure what happened, but I borked basic network connectivity).

Still, once that was done, it STILL had problems (interconnect validate would fail).

Worked with Celerra engineering - and got it to work consistently. See this post for step-by-step instructions.

http://virtualgeek.typepad.com/virtual_geek/2008/11/celerra-virtual-appliance-howto-301---replicating-between-two-celerra-vsas.html