NS-G2 DM CPU type mismatch

Question

Hi,

I noticed a unbeliveable data mover CPU type information problem while configuring my NS-G2 nas gateway.

It is NS-G2 (P/NO 100-562-150) suppose to have dual 2.8 GHz Intel Xeon processor. But when I check via Celerra manager GUI and "server_sysconfig server_3 –Platform" command, it shows as Pentium iv processor.

But if I reboot a DM, the BIOS can recognize as Xeon..(via Console)

Same result for both DMs.

Champaka

Rainer_EMC · Answer

please open a service request

sebbyr · Answer

Could you please provide the output to the following: server_sysconfig ALL -P Thanks. Sebby Robles EMC Celerra Support

champaka1 · Answer

Hi Sebby,

[nasadmin@SLT_NS-G2 ~]$ server_sysconfig ALL -P
server_2 :
        Processor              = Intel Pentium 4
        Processor speed (MHz) = 2800
        Total main memory (MB) = 4092
        Mother board           = CMB-Sledgehammer
        Bus speed (MHz)        = 800
        Bios Version           = 04.00
        Post Version           = Rev. 01.59
server_3 :
        Processor              = Intel Pentium 4
        Processor speed (MHz) = 2800
        Total main memory (MB) = 4092
        Mother board           = CMB-Sledgehammer
        Bus speed (MHz)        = 800
        Bios Version           = 04.00
        Post Version           = Rev. 01.59

Champaka

Celerra

NS-G2 DM CPU type mismatch

Was this post helpful?