thats a restriction when using SRDF or Timefinder - in the manual it says:
Automatic File System Extension cannot be used for any file system that is part of an SRDF configuration, that is, file systems on Data Movers configured with an RDF standby. This includes TimeFinder®/FS NearCopy and FarCopy implementations. Therefore, do not use the nas_fs command with the auto_extend option for file systems associated with SRDF. Doing so generates the error message: ¿Error 13421842457: operation not supported for file systems of type SRDF.¿
I think thats because when working with SRDF the file systems are built on complete LUNs for consistency reasons so that one LUN is only used by one file system. You'll see that when manually extending a SRDF file system it will actually extend it by a complete LUN (dvol, hyper)
In a non-SRDF file system the volume manager actually slices the LUNs and puts multiple file systems on it. That slicing is also used for the granular and automatic file system extention.
You can certainly open an enhancement request for it
Actually I am able to slice volumes. But once again - I am able to extend a volume manually. When I select slicing I can add 10 MB to the volume. Without slicing it adds something like 16,x GB.
What I would like to see is - when the volume reaches high watermark - please add 4x16GB to the volume and write me a brief note that you did so.
Rainer_EMC
4 Operator
•
8.6K Posts
0
September 10th, 2009 02:00
thats a restriction when using SRDF or Timefinder - in the manual it says:
Automatic File System Extension cannot be used for any file system that is part
of an SRDF configuration, that is, file systems on Data Movers configured with
an RDF standby. This includes TimeFinder®/FS NearCopy and FarCopy
implementations. Therefore, do not use the nas_fs command with the
auto_extend option for file systems associated with SRDF. Doing so generates
the error message: ¿Error 13421842457: operation not supported for file
systems of type SRDF.¿
I think thats because when working with SRDF the file systems are built on complete LUNs for consistency reasons so that one LUN is only used by one file system.
You'll see that when manually extending a SRDF file system it will actually extend it by a complete LUN (dvol, hyper)
In a non-SRDF file system the volume manager actually slices the LUNs and puts multiple file systems on it.
That slicing is also used for the granular and automatic file system extention.
You can certainly open an enhancement request for it
Rainer
Rainer_EMC
4 Operator
•
8.6K Posts
0
September 10th, 2009 04:00
however its still the case that automatic file system extention isnt supported with SRDF
Dimebag1
19 Posts
0
September 10th, 2009 04:00
Actually I am able to slice volumes. But once again - I am able to extend a volume manually. When I select slicing I can add 10 MB to the volume. Without slicing it adds something like 16,x GB.
What I would like to see is - when the volume reaches high watermark - please add 4x16GB to the volume and write me a brief note that you did so.
Ingo