Required: S95cable_check script

what are you trying to do ?

The S95cable_check script wont do any cleanup.
It is there to interface with the Celerra Startup Assistent (CSA) and gets deleted once CSA has been run

You can get that script back from the install media

BUT that alone wont achieve anything

Hi,

someone from the Middle East IP Team will be contacting you and help you directly

Rainer

Hi, I am also looking for this script, as I need to re-start unfinished CSA.

" Copy the S95cable_check script to /etc/rc3.d and chmod the file to make it executable by using the chmod 755 S95cable_check command.

The challenge here is that the CSA process deletes the S95cable_check file. If a copy has not been previously saved, mount a similar version of the NAS CD-ROM and copy the S95cable_check script from the /EMC/nas directory to the /etc/rc3.d directory. If a copy cannot be downloaded, contact EMC Support and reference the NAS version involved.

Support: Alternately, download and extract the S95cable_check script from the latest version of the CSA demo system reset v4.zip utility found on the Celerra Forum: http://celerra.EMC.com/kbcategory.jspa?categoryID=26"

Thank you for any reply ...

Hi,

if you are an EMC service partner then please contact EMC support - they can get you what you need.

If you are an end-customer than please open a service request.

Rainer