Problem with spare node

Question

Good afternoon! I have a problem. As it is possible to make spare node from storage node. And how it is possible to make it?

Suchinth1 · Accepted Answer

Hi, It is possible to make a spare node from a storage node only if it is installed as basic,no compliance mode ,but that will remove all data from the storage node, so be careful before doing this, make sure the back up has been taken 1. Make a local connection to a Storage node using a Service PC with the current set of Global Service Tools for Centera. If the node to be reset is node 16 - make a connection to C001n15.2. Unlock the node and log in using Centera CLI. IP: 10.255.0.13. Change the node type to spare Set the nodes to be reinitialized to spare - enter the following command. type set node type c001nxx spare xx will be the node number. Answer Y to the to the two questions posed.Suchinth

Problem with spare node

Dell Support Resources

Latest Solutions

Requesting for a free laptop

laptop freezes after 10 minutes of startup

17 R3, new battery discharge before install?

Precision 5820 boot looping and giving 1-4-1 error

charging adapter not working