This post is more than 5 years old
27 Posts
1
5269
January 13th, 2015 06:00
Power off a Cisco MDS 9148
I need to power off a Cisco MDS 9148 FC switch to move it to a new location and power it back up. Is there a specific procedure to do this?
0 events found
No Events found!
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
January 13th, 2015 06:00
nothing special, flip on/off switches on the back of each power supply. Do save the config to an external location of course (tftp/ftp/scp)