Unsolved
This post is more than 5 years old
57 Posts
0
458
April 10th, 2010 05:00
Adding DAE4P to cx3-20
Hi All
I am planning to upgrade CX3-20 by adding 2 X DAE4P .I have gone through the docs .It seems to be ok with me .use the NST .Is there any thing i have to take care about are there any pit falls please help me out
Thanks in Advance
0 events found
No Events found!
AranH1
2.2K Posts
1
April 13th, 2010 10:00
Adin,
The process is fairly straightforward and the NST is the eaisiest way to get the guidance you need for performing the process. It will prompt you when to connect the DAE cables to the new enclosures.
You should rack the DAEs ahead of time and power them up to ensure there are no failed disks due to shipping. Also you will need to plan out which address you will need to set each enclosure to.
adin2
57 Posts
0
April 14th, 2010 00:00
Thank You Very much.
So i belive i have to do it like this
1.Power on the DAE first
2.Check the HDD are Ok
3.Select the enclosure address
4 Run the NST
5.connect the backend fibre when the NST asks for it.
Thanks again
AranH1
2.2K Posts
0
April 14th, 2010 08:00
Yep, its that easy!