This post is more than 5 years old
1 Rookie
•
106 Posts
0
926
May 12th, 2011 02:00
Defrag doesn't start
HI all.
Two weeks ago I've started a defrag on a raidgroup, but today it's still at 0%
The raid group is defragmenting
the raid group is transitioning
Expansion/Defrag priority -> Medium
On this RG I've placed 1 prodution Lun and 2 secondary MV/s LUNs. The RG %utilization il low.
Thanks
Matteo
No Events found!
smit9500
5 Posts
0
May 16th, 2011 06:00
What FLARE Release are you running? There is an issue with FLARE 29. See KB Solution emc229869.
If you cannot access the solution online, contact EMC Support and cite the solution ID.
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
May 12th, 2011 03:00
have you tried restarting the management service, to rule out it's a GUI issue.
errevi_mancio
1 Rookie
•
106 Posts
0
May 12th, 2011 05:00
Hi,
I've just restarted management server on both SPs, but the defrag is still at 0%
thanks
Matteo
errevi_mancio
1 Rookie
•
106 Posts
0
May 16th, 2011 09:00
Hi,
I've ran naviseccli setsniffer <lun-number> -bv , on a RLP and than the defrag has been started.
thanks
Matteo