Error message when using naviseccli getunusedluns

Question

Hello,

Each time I launch this command : naviseccli -h getunusedluns I receive this mail from Clariion :

Time Stamp 09/09/11 13:54:57 (GMT) Event Number 71058233

Severity Error Host SP-A

Storage Array CKM xxxxxxxxxxx SP N/A Device N/A

Description Failing Command: Set LUN.

71 05 82 33

The command works perfectly but it's annoying to receive this mail.

Does anyone know why and how to stop this?

Regards

kelleg · Accepted Answer

Got this from engineering:

------------------------------

It turns out that the code sees if the LUNs can be unbound by trying to unload features (such as mirroring). If they cannot be unbound (by being unloaded), the LUN is not considered unused. But the side effect of this method is having these error messages show up in the log file.

This is the intended behavior and as workaround, we recommend that you deselect the event 0x71058233 in the template.

------------------------------

glen

Edit: see Support Solution emc170736 on PowerLink

Message was edited by: Glen Kelley

kelleg · Answer

what flare vesrion on the array and what CLI version on the host? glen

obirotheau · Answer

Hi, The array is CX4-240 Flare version : 4.30.0.5.509 Naviseccli version : 7.31.0.3.76 Thanks

kelleg · Answer

What host are you running this from - Windows? What version OS? Is the error you see in the CLARiioN Event log or is that on the host?

There's a new version of naviseccli 7.31.25.x.x. I ran this on my Windows XP using the latest naviseccli at a 30.0.5.517 array without errors - but there are no used LUNs at the moment on that array. I'll see if I can find a 509 array.

glen

obirotheau · Answer

Thanks a lot ! You were very helpful.

obirotheau · Answer

One last question: I succesfuly created a new template but can't delete the old ones, they're all grayed out... We can't edit their properties too.

dynamox · Answer

enter engineering mode contact EMC for instrcution on using Engineering Mode Message was edited by: Glen Kelley

SKT2 · Answer

active( in use) template will not available for editing other than in ENG mode. also check out emc161598

CLARiiON

Error message when using naviseccli getunusedluns

Was this post helpful?