Unsolved
This post is more than 5 years old
2 Intern
•
43 Posts
0
2061
September 29th, 2010 03:00
How to Initialize Clariion Array
can you please explain how to initialize Clariion Array and when initialization required.
0 events found
No Events found!
Parks2
116 Posts
0
September 29th, 2010 03:00
The Clariion can be initilized by you the init wizard that comes with a new clariion ... The Clariion only needs to be initilzed one time
lakshman1
2 Intern
•
43 Posts
0
September 29th, 2010 04:00
in what circumstance who have to initialize arry apart from the first initialization.
kelleg
6 Operator
•
4.5K Posts
0
October 5th, 2010 09:00
There is a utility that comes with each array that helps you initialize the first time - this setups the IP addresses for the Management Ports and other things.
Go to the below link on PowerLink - this is for the CX4 - select the "Installation and Upgrade" link, then select "Installing your CX4 Storage System
This will provide you with more information
https://support.emc.com/products/CLARiiONCX4
glen
Was your question answered? If so, please remember to mark the question as answered and to award points to the person with the correct answer.
glen