Copying data between LUNs within a CLARiiON storage system
If you will be copying data from one LUN to one or many LUNs within the same CLARiiON storage system, the following requirements must be met before you start a SAN Copy session:
Note: No zoning is required when you are copying data within a storage system.
◆ The storage system must be a SAN Copy storage system. ◆ The source and all destination LUNs participating in a copy session must belong to the same SP. ◆ For incremental copy sessions ¿ The source logical unit cannot be a SnapView snapshot. ¿ You must configure the reserved LUN pool before you start an incremental SAN Copy session (see the Navisphere Manager online help, or the EMC Navisphere Manager Administrator¿s Guide).
Mpalumbo
35 Posts
0
April 29th, 2008 11:00
Copying data between LUNs within a CLARiiON storage system
If you will be copying data from one LUN to one or many LUNs
within the same CLARiiON storage system, the following
requirements must be met before you start a SAN Copy session:
Note: No zoning is required when you are copying data within a storage
system.
◆ The storage system must be a SAN Copy storage system.
◆ The source and all destination LUNs participating in a copy
session must belong to the same SP.
◆ For incremental copy sessions
¿ The source logical unit cannot be a SnapView snapshot.
¿ You must configure the reserved LUN pool before you start an
incremental SAN Copy session (see the Navisphere Manager
online help, or the EMC Navisphere Manager Administrator¿s
Guide).
https://powerlink.emc.com/nsepn/webapps/btg548664833igtcuup4826/km/appmanager/km/secureDesktop?_nfpb=true&_pageLabel=servicesDocLibPg&internalId=0b0140668002022b&_irrt=true
See following:
SAN Copy for Navisphere Administrators guide 03.22 A07